HP l717g Manual Do Utilizador
Setting Up the Monitor
2. Align the hooks on the stand base with the matching slots in
the base of the monitor
3. Insert the hooks into the slots.
Inserting the Monitor into the Stand Base
Removing the Stand Base
1. Place the monitor with it front facing downward on a cushion
or soft cloth.
Ä
CAUTION: Do not remove the stand base from the monitor while the
monitor is in the upright position. Lay the front bezel down on a soft
area to prevent it from getting scratched, defaced, or broken.
monitor is in the upright position. Lay the front bezel down on a soft
area to prevent it from getting scratched, defaced, or broken.
2. To remove the stand base, hold the botton of the stand with
one hand and pull the base bottom latch with the other hand,
as show in the following figure.
as show in the following figure.
Ä
CAUTION: Ensure that the bottom of the stand base is positioned
over a table or desktop before removing the base from the monitor.
over a table or desktop before removing the base from the monitor.
3–2
User Guide