HP l717g Manual Do Utilizador
Setting Up the Monitor
Connecting the Monitor
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the signal cable 1. When attached, tighten the
thumbscrews to secure the connection.
a. For analog operation, connect one end of the VGA signal
cable to the VGA connector on the monitor and the other
end to the VGA connector on the computer. This cable is
provided with the monitor.
end to the VGA connector on the computer. This cable is
provided with the monitor.
b. For digital operation, use the DVI-D signal cable.
Connect one end of the DVI-D cable to the DVI
connector on the monitor and the other end to the DVI
connector on the computer. This cable is provided with
the monitor.
connector on the monitor and the other end to the DVI
connector on the computer. This cable is provided with
the monitor.
Ä
CAUTION: The DVI-D cable supplied with the monitor is for
digital-to-digital connection only. Your computer must have a
DVI-compatible graphics card installed for use with this cable.
digital-to-digital connection only. Your computer must have a
DVI-compatible graphics card installed for use with this cable.
3–4
User Guide