HP ml350 Manual Do Utilizador
![HP](https://files.manualsbrain.com/attachments/29005dca542c93ad59e01e223583dbd51961550d/common/fit/150/50/3931a36faa9f1af0627fe52b73d277ccf98e5d18c55433f253353db13ee5/brand_logo.jpeg)
Removal and replacement procedures 36
6.
Remove the four T-15 screws and slide the hard drive cage out of the chassis.
7.
Remove all hard drives.
To replace the components, reverse the removal procedure.
NOTE:
When replacing or installing a 6-bay hard drive cage, connect the 10-pin power cable
from the power backplane to the 8-pin power connector on the hard drive cage backplane.
When seated properly, the connectors have a two-pin overlap. The overlap is cosmetic only
and causes no functional side effects.
Air baffle
To remove the component:
1.
Power down the server (on page
2.
Do one of the following: