HP ml310 Manual Do Utilizador

 

Powering up the server .................................................................................................................

Powering down the server ............................................................................................................

Unlocking the bezel ......................................................................................................................

Removing the access panel...........................................................................................................

Installing the access panel ............................................................................................................

 

 

To power up the server, press the Power On/Standby button. 

 

  WARNING:  To reduce the risk of personal injury, electric 

shock, or damage to the equipment, remove the power cord to 
remove power from the server. The front panel Power On/Standby 
button does not completely shut off system power. Portions of the 
power supply and some internal circuitry remain active until AC 
power is removed. 

  IMPORTANT:  If installing a hot-plug device, it is not necessary to 

power down the server. 

1.

  Shut down the OS as directed by the OS documentation. 

2.

  Press the Power On/Standby button to place the server in standby mode. 

When the server enters standby power mode, the system power LED changes 
to amber.  

3.

  Disconnect the power cords. 

The system is now without power.