HP proliant dl580 Manual Do Utilizador
Server cabling 94
7.
Loosen the screw, and slide the USB cable connector up to remove the cable assembly from the
server.
server.
To replace the component, reverse the removal procedure.
Power switch cable assembly
1.
Power down the server (on page
2.
Extend the server from the rack ("
3.
Remove the access panel ("
4.
Remove the front bezel ("
5.
Disconnect all cables from the media board.
6.
Remove the media board ("
7.
Remove the USB cable assembly.
8.
Insert a flat screwdriver into the power switch cable housing next to the middle two LEDs and pry the
housing from the chassis.
housing from the chassis.