HP proliant dl580 Manual De Usuario

Server cabling  94 

Loosen the screw, and slide the USB cable connector up to remove the cable assembly from the 
server. 

 

To replace the component, reverse the removal procedure. 

 

Power switch cable assembly 

Power down the server (on page 

Extend the server from the rack ("

Remove the access panel ("

Remove the front bezel ("

Disconnect all cables from the media board. 

Remove the media board ("

Remove the USB cable assembly. 

Insert a flat screwdriver into the power switch cable housing next to the middle two LEDs and pry the 
housing from the chassis.