Canon EOS-1D Mark II N Manual Do Utilizador
4-13
You can load saved tone curve files from a computer (p.2-13) and register up to 3 on the
camera. You can also select the tone curve that has been loaded into the [TCD 1] through
[TCD 3] tab sheets, from the list box shown in “Specifying the Parameters” (p.4-12).
camera. You can also select the tone curve that has been loaded into the [TCD 1] through
[TCD 3] tab sheets, from the list box shown in “Specifying the Parameters” (p.4-12).
O
For more information on registering the tone curve ([TCD 1] through [TCD 3]) on the
camera, refer to “Setting the Processing Parameters” in the camera’s Instruction Manual.
camera, refer to “Setting the Processing Parameters” in the camera’s Instruction Manual.
O
This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds and
EOS-1D.
EOS-1D.
O
With the EOS-1D, only one tone curve can be registered.
1
Click the [Tone curve] button
.
¿
The [Tone curve settings] dialog box
appears.
appears.
O
With the EOS-1Ds and EOS-1D, click the
[Parameters] button and then click the
[User-Defined Tone Curve] button on the
displayed [Parameters Settings] dialog
box.
[Parameters] button and then click the
[User-Defined Tone Curve] button on the
displayed [Parameters Settings] dialog
box.
2
Select the [TCD 1], [TCD 2] or [TCD 3] tab.
O
For the EOS-1D, proceed to step 3.
3
Click the [Open] button.
¿
The [Open] dialog box appears.
4
Open the folder containing the tone curve, select a file, and then
click the [Open] button
click the [Open] button
¿
The tone curve is loaded.
Specifying the Tone Curve
5
Select a channel from the list and confirm.
6
Click the [Apply to camera] button.
¿
The tone curve is registered on the camera.
7
Click the [Close] button.
¿
The [Tone curve settings] dialog box closes.
Closes the dialog box.
Applies the settings to the camera.