Canon pixma ip4300 Manual Do Utilizador

Página de 102
Paper Does Not Feed Properly
Unnecessary print jobs are left in 
queue. / Computer problems.
Restarting your computer may solve the problem.
If there are any unnecessary print jobs, follow the procedure below to delete 
(1)Open the printer properties dialog box.
Refer to “Opening the Printer Properties Dialog Box Directly from the Start 
Menu” in “Opening the Printer Properties Dialog Box (Windows)” of the 
User’s Guide on-screen manual.
(2)Click the Maintenance tab and then View Printer Status.
(3)Click Display Print Queue.
(4)Select Cancel All Documents (
Purge Print Documents
in Windows Me or 
Windows 98
) on the Printer menu.
You may not be able to select individual print jobs in Windows XP or 
Windows 2000.
(5)When the confirmation message is displayed, click Yes.
The print jobs are deleted.
(1)Click the printer icon in the Dock to display the list of print jobs in progress.
In Mac
 OS X v.10.2.8, click the printer icon in the Dock to start up the Print 
Center and double-click the name of your printer in the Printer List.
(2)Select the print job to delete and click 
The print jobs are deleted.
Printing on inappropriate type of paper.
Check to see if the paper you are printing on is not too thick or curled.
See “Media Types You Cannot Use” on page 5.
Paper Feed Rollers are dirty.
Follow the procedure below to clean the Paper Feed Rollers.
Cleaning the Paper Feed Rollers will wear the rollers, so perform this procedure 
only when necessary.
(1)Make sure that the printer is turned on, and then remove any paper from the 
Auto Sheet Feeder and Cassette.
(2)Press the Open Button to open the Paper Output Tray and extend the Output 
Tray Extension.
(3)Press the Paper Feed Switch to select the paper source to clean.
(4)Hold down the RESUME/CANCEL button and release it when the POWER 
lamp flashes green three times.
The Paper Feed Roller will rotate as it is cleaned.
(5)Repeat step 4 twice.
(6)Load three or more sheets of A4 or Letter-sized plain paper in portrait 
orientation in the paper source you selected in step 3.
(7)Hold down the RESUME/CANCEL button and release it when the POWER 
lamp flashes green three times.
The paper cleans the Paper Feed Rollers as it feeds through the printer.
(8)Repeat step 7 three times.
If there are no signs of improvement after cleaning the rollers three times, 
contact a Canon service representative.