Sony MDS-JB980 Manual Do Utilizador
20
GB
Other Operations
1)
Automatic Music Sensor
2)
When you locate a point while monitoring the
sound.
sound.
3)
When you locate by observing the time
indication.
indication.
Tips
•
The MDLP indicator lights up when you select a
track recorded in LP2 or LP4 Stereo mode.
track recorded in LP2 or LP4 Stereo mode.
•
To use headphones, connect them to the PHONES
jack. Turn PHONE LEVEL to adjust the
headphones level.
jack. Turn PHONE LEVEL to adjust the
headphones level.
•
When “– Over –” appears in the display, the MD has
reached the end while you’re pressing M. Turn
AMS counterclockwise (or press .) or press m
to go back.
reached the end while you’re pressing M. Turn
AMS counterclockwise (or press .) or press m
to go back.
•
You can adjust the analogue signal level output to
the PHONES jack and the ANALOG OUT jacks.
the PHONES jack and the ANALOG OUT jacks.
1 While the deck is playing, press DISPLAY/
CHAR (or DISPLAY) repeatedly until the
line output adjustment display appears.
line output adjustment display appears.
2 Turn AMS (or press LEVEL +/–
repeatedly) to adjust the output signal
level.
level.
•
You can use Setup Menu to adjust the analogue
output level.
output level.
1 While the deck is playing, press MENU/
NO.
2 Turn AMS (or press
./>
repeatedly)
until “Setup?” appears, then press AMS or
YES.
YES.
3 Turn AMS (or press
./>
repeatedly)
until “Aout” appears, then press AMS or
YES.
YES.
4 Turn AMS (or press LEVEL +/–
repeatedly) to adjust the output signal
level, then press AMS or YES.
level, then press AMS or YES.
5 Press MENU/NO.
Note
When you eject the MD or turn off the deck, the
output level is reset to the factory setting (0.0 dB).
output level is reset to the factory setting (0.0 dB).
Playing a track by entering the track
number
Press the number button(s) on the remote
to enter the track number of the track you
want to play.
to enter the track number of the track you
want to play.
To enter a track number over 10
1 Press >10.
“-” equal to the number of digits for the number
of tracks recorded on the MD flashes.
of tracks recorded on the MD flashes.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
•
To select track number 30 on an MD recorded with
50 tracks, press >10, then 3 and 10/0.
50 tracks, press >10, then 3 and 10/0.
•
To select track number 30 on an MD recorded with
200 tracks, press >10, then 10/0, 3 and 10/0.
200 tracks, press >10, then 10/0, 3 and 10/0.
To
Do the following:
Stop play
Press x.
Pause play
Press X.
Resume play
after pausing
after pausing
Press H or X.
Go to the next or
a succeeding
track during play
a succeeding
track during play
Turn AMS
clockwise (or press
> repeatedly).
Go to a
preceding track
during play
preceding track
during play
Turn AMS counterclockwise (or
press . repeatedly).
press . repeatedly).
Go to the
beginning of the
current track
during play
beginning of the
current track
during play
Turn AMS counterclockwise (or
press . once).
press . once).
Go to a specific
track while the
deck is stopped
track while the
deck is stopped
Turn AMS (or press ./>
repeatedly) until the track number
you want to go to flashes in the
display, then press AMS or H.
repeatedly) until the track number
you want to go to flashes in the
display, then press AMS or H.
Find a point in a
track
track
Press down m/M during play
or play pause
. Release it when
you reach the desired point.
Eject the MD
Press EJECT A after stopping
play.
play.