Sony MHC-GNX880 Manual Do Utilizador

Press N.

The tape starts playing.

*1

“RELAY” appears in the display Relay Play 
follows this sequence, then stops:
Deck A (front side) t Deck B (front side)

Do not push A Z (Deck A) or B Z (Deck B)

 

while 

playing a tape, otherwise the tape could be damaged.

• When a tape is inserted, corresponding presence 

indicator lights up in the display.

• If you press TAPE A/B (or TAPE on the remote) 

while the system is turned off, the system turns on 
automatically and “TAPE A” or “TAPE B” is 
selected as the function.

• If you press N

 

during “TAPE A” function and there 

is no tape in Deck A, the system automatically 
switches to “TAPE B” function when there is a tape 
in Deck B. Then, playback will start and vice versa.

• You can also press FUNCTION on the remote 

repeatedly to select “TAPE A” or “TAPE B”.

You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The 
recording level is adjusted automatically.

When you want to record an album of MP3 
audio tracks, press PLAY MODE on the 
remote repeatedly until “ALBM” lights up 
in the display. Then press ALBUM +/– 
repeatedly to select the album you want.

“SYNC” lights up in the display.
“REC” flashes in the display.
Deck B standby for recording.

“REC” lights up in the display.
Recording starts.

Press x.

You can record tracks on all the discs in the 
order you want using Program Play. Between 
steps 2 and step 3 of “CD Synchro Recording” 
(page 16), do steps 2 to 6 of “Creating your own 
program” (page 12). When programming, make 
sure the playing times do not exceed the length 
of one side of the tape.

You cannot listen to other sources while recording.

Stop playback

Press x.

Pause playback

Press X. Press X again to resume 
playback.

Fast-forward or 
rewind

Press m or M. To back to 
normal playback, press N. 

Remove a tape

Push A Z (Deck A) or B Z 
(Deck B) when playback is 
stopped.

Tape presence indicator

Front side indicator