Sony RHT-G1000 Manual Do Utilizador
20
GB
To listen to non-preset radio
stations
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. Press TUNING + or – to stop the automatic
tuning.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. Press TUNING + or – to stop the automatic
tuning.
• If an FM program is noisy, press FM MODE so that
“MONO” appears. There will be no stereo effect, but
the reception will improve. Press the button again to
restore the stereo effect.
the reception will improve. Press the button again to
restore the stereo effect.
• To improve reception, reorient the supplied antennas
(aerials).
Naming preset stations
You can enter a name for preset station. The
name (for example, “XYZ”) appears when the
station is selected.
Note that no more than one name can be entered
for each preset station.
name (for example, “XYZ”) appears when the
station is selected.
Note that no more than one name can be entered
for each preset station.
1
Press TUNER/BAND repeatedly until
“FM” or “AM” appears.
“FM” or “AM” appears.
The last station you received is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
select the preset station you want to
create an index name for.
3
Press TUNER MENU.
4
Press
C/X/x/c repeatedly until “Name
In?” appears.
5
Press ENTER.
6
Create a name by using the cursor
buttons.
buttons.
Press
X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
Press
C/c repeatedly until the character to
be changed flashes, then press
X/x to select
the desired character.
To erase the character, press
C/c repeatedly
until the character to be erased flashes, then
press CLEAR.
press CLEAR.
7
Press ENTER.
The station name is stored.
• You can check the frequency by pressing DISPLAY
repeatedly.
To change the AM tuning interval
(Except for European model)
(Except for European model)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the system. While holding down
INPUT SELECTOR, press "/1 on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the system. While holding down
INPUT SELECTOR, press "/1 on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.
Tip
Tip