Sony RHT-G1000 Manual Do Utilizador

Página de 32
4
GB
Notes on installation
• Be careful not to pinch your hand or fingers between 
the TV and the stand.
• To prevent the stand from distorting, observe the 
following:
– Install the stand on a solid and flat surface.
– If you install the stand on a soft surface such as a 
mat, first lay a board under the stand.
– Do not install the stand in a place subject to direct 
sunlight or near a heater.
– Do not install the stand in a hot or humid place, or 
outdoors.
• Moving the stand requires four people or more. Move 
the stand only after removing the TV. If you fail to do 
so, the TV may fall from the stand resulting in serious 
injury. Do not hold the grille as it may detach from the 
stand resulting in serious injury. Be careful not to 
pinch your fingers when moving the stand.
Notes on use
• Do not place any hot objects on the stand. If you do so, 
the stand may discolor or distort.
• To keep the stand clean, occasionally wipe the stand 
gently with a dry, soft cloth. Stubborn stains may be 
removed with a cloth slightly dampened with diluted 
detergent, followed by a soft dry cloth. Do not use any 
type of chemicals, such as thinner or benzine, as they 
may damage the finish of the stand.
• When placing the top front cover on the floor after 
removing it from the stand, cover the floor with a 
cloth, etc., beforehand to protect the floor from 
damage.
Inserting batteries into the 
remote
You can control the system using the supplied 
remote. Insert two size AA (R6) batteries by 
matching the + and 
−  ends on the batteries to the 
markings inside the compartment.
• Do not leave the remote in an extremely hot or humid 
place. 
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, 
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from 
the sun or lighting apparatus. Doing so may cause a 
malfunction.
• If you do not intend to use the remote for an extended 
period of time, remove the batteries to avoid possible 
damage from battery leakage and corrosion.
Note