Sony ST-SDE700 Manual Do Utilizador

C:\Documents and 
Settings\pc13\Desktop\JC060000_2886257121SDE700_GB\2886257121\GB04REC_ST-
SDE700-CEL.fm

ST-SDE700

2-886-257-12 (1)

Before you can receive DAB stations, you 
must register the contents of broadcast (service 
components) so that they can be received by 
this tuner using the DAB INITIAL SCAN 
procedure.
Be sure to use the buttons on the tuner for this 
operation.

“DAB SCAN” flashes on the display.

“SCAN ON” appears in the display and 
the tuner scans and stores all the DAB 
broadcasting contents and registers them 
in this tuner.
When done, “FINISH” appears in the 
display momentarily and the tuner returns 
to the normal operation.

• If you have not registered the contents of broadcast 

(service components) in DAB band, “DAB TUNE” 
appears in the display for a while, then
“DAB _ _ _ _” appears. “PLEASE RUN DAB 
SCAN FOR DAB STATION” will then scroll 
across the display. In this case, do the DAB 
INITIAL SCAN procedure (page 15).

• Buttons on the tuner or supplied remote will not 

function during DAB INITIAL SCAN procedure, 
except POWER.

• If you move to another area, repeat this procedure 

to store stations in your new area.

• This procedure does not create any presets.
• This procedure clears all previously stored presets.
• For details on presets, see “Presetting DAB 

stations” on page 16.

The last received station is tuned in. 
When selecting DAB, “DAB TUNE” will 
appear in the display while the tuner is 
collecting DAB data. Please wait until 
this message disappears.

0

GB01COV_ST-SDE700-CEL.book  Page 15  Tuesday, July 25, 2006  4:52 PM