Panasonic KX-MB2000HX Manual Do Utilizador
Problem
Cause & Solution
When an extension telephone
is connected, I cannot receive
documents by pressing
MGNMBNM9N.
is connected, I cannot receive
documents by pressing
MGNMBNM9N.
beforehand.
R Press MGNMBNM9N firmly.
R You may have changed the remote fax activation code from MGNMBNM9N
R You may have changed the remote fax activation code from MGNMBNM9N
(default setting). Verify the remote fax activation code (feature #434 on
page 64).
page 64).
I cannot hear a dial tone.
R The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 17).
R If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
check the splitter/coupler.
R Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
R The power cord or telephone line cord is not connected. Check the
R If you connected the unit through a computer modem, connect the unit
directly to a telephone line jack.
I cannot make calls.
R The dialling mode setting may be wrong. Change the setting (feature #120
The unit does not ring.
The other party complains
they only hear a fax tone and
cannot talk.
they only hear a fax tone and
cannot talk.
used for faxes.
The MRedialN or MPauseN
button does not function
properly.
button does not function
properly.
R If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.
redialled.
I cannot receive a fax
document on the computer.
document on the computer.
R Make sure the following features are set beforehand.
– PC fax reception (feature #442 on page 65)
– Computer setting for the PC fax reception (feature #443 on page 24)
– Computer setting for the PC fax reception (feature #443 on page 24)
I cannot display a received fax
document on the web
browser (KX-MB2030 only).
document on the web
browser (KX-MB2030 only).
R Make sure the following features are set beforehand.
– Fax preview mode (feature #448 on page 53)
– Web fax preview access code (feature #450 on page 53)
– Web fax preview access code (feature #450 on page 53)
R You cannot display a received fax document on the web browser during
printing, copying or scanning. Try again after printing, copying or scanning.
I cannot erase a received fax
document on the web
browser (KX-MB2030 only).
document on the web
browser (KX-MB2030 only).
R View, print or save a received fax document before erasing (page 53).
88
10. Help