Panasonic wj-hd220 Manual Do Utilizador
42
4. Repeat steps 1, 2, and 3 until all steps are pro-
grammed, or press the [SETUP/ESC] button to return to
the SEQUENCE SETUP menu.
the SEQUENCE SETUP menu.
5. Move the cursor to SEQUENCE TIMING in the SEQ
SETUP menu.
Select INT or EXT with the JogDial, and press the
JogDial.
The default is INT.
Select INT or EXT with the JogDial, and press the
JogDial.
The default is INT.
INT: Forwards the step when the assigned time elaps-
es.
EXT: Forwards the step when the SEQ IN signal is input
to the rear panel.
6. Move the cursor to AUTO SKIP with the [D] or [C] but-
ton.
Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
Select ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: The sequence skips any step where no video is
input.
OFF: The step will be displayed as a blackout screen.
● Spot Sequence Setup (SPOT SEQ
SETUP)
Open the SPOT SEQ SETUP menu to program the
sequence steps for displaying single input images.
sequence steps for displaying single input images.
1. Move the cursor to the desired step using the [D] or
[C] button.
2. Select a camera number with the JogDial, and press
the JogDial.
The default camera number is identical to the step num-
ber.
The default camera number is identical to the step num-
ber.
Available cameras: From 1 to 8.
Note: The recorder will skip any step assigned "–".
3. Select the duration for the step with the JogDial, and
press the JogDial.
Available durations: 2-30S
SPOT SEQ SETUP
STEP CAM SEC
1
1
→ 1 2S
2
→ 2 2S
3
→ 3 2S
4
→ 4 2S
5
→ 5 2S
6
→ 6 2S
7
→ 7 2S
8
→ 8 2S
● Sequence Setup (SEQUENCE
SETUP)
1. Move the cursor to SEQ SETUP in the SWITCHER
SETUP menu, and press the JogDial.
The SEQUENCE SETUP menu opens.
The SEQUENCE SETUP menu opens.
2. Select either MULTI SEQ SETUP or SPOT SEQ SETUP
with the [D] or [C] button, and press the JogDial. The
selected menu opens.
selected menu opens.
● Multiscreen Sequence Setup (MULTI
SEQ SETUP)
Open the QUAD SEQ SETUP menu to program the
sequence steps for displaying quad-split and single input
images.
sequence steps for displaying quad-split and single input
images.
1. Move the cursor to the desired step using the [D] or
[C] button.
2. Select a camera number with the JogDial, and press
the JogDial.
The default camera number is identical to the step num-
ber.
The default camera number is identical to the step num-
ber.
Available cameras: From 1 to 8 individually, 4A(1-4), or
4B(5-8)
Note: The recorder will skip any step assigned "–".
3. Select the duration for the step with the JogDial, and
press the JogDial.
Available durations: 2-30S
SEQUENCE SETUP
MULTI SEQ SETUP
O
SEQUENCE TIMING INT
AUTO SKIP ON
AUTO SKIP ON
SPOT SEQ SETUP
O
SEQUENCE TIMING INT
AUTO SKIP ON
AUTO SKIP ON
MULTI SEQ SETUP
STEP CAM SEC
1
1
→ QUAD-4A 2S
2
→ QUAD-4B 2S
3
→ - 2S
4
→ - 2S
5
→ - 2S
6
→ - 2S
7
→ - 2S
8
→ - 2S