Panasonic wj-hd220 Manual Do Utilizador

43

ON: Enables the secret view function.
OFF: Disables the secret view function.

■ System Information

● HDD Hour Meter (HDD HOUR METER)

The meter shows how many hours each hard disk has been
operated in playback, recording and idle. The built-in HDD
needs replacement when the hour meter reads around 
30 000 H.

● HDD Capacity (HDD CAPACITY)

The total usable capacity of the built-in hard disk is indicat-
ed.

● Default (DEFAULT)

This enables the recorder to restore all setup data to the
default values.

1. Press the JogDial to move the cursor to DEFAULT.

2. When the cursor is on SET

→, press the JogDial again.

3. Select YES or NO with the JogDial, and press the

JogDial.
The default is NO.

NO: Current setup data is retained.
YES: Current setup data is reset to the default values.

When all setup data are reset to the defaults, "SET
DONE" is displayed for a few seconds and then
changes to SET

→.

Note: The recorder will restart when the network setup has

been changed and the menu is closed.

→        SET→

O

4. Repeat steps 1, 2, and 3 until all steps are pro-

grammed, or press the [SETUP/ESC] button to return to
the SEQUENCE SETUP menu.

5. Procedures for SEQUENCE TIMING are the same as

step 5 in MULTI SEQ SETUP.

6. Procedures for AUTO SKIP are the same as in step 6 of

MULTI SEQ SETUP.

● Camera View Setup (CAMERA VIEW

Open the CAMERA VIEW SETUP menu to program the live
image of each camera channel to be displayed or vailed on
the monitor.

1. Move the cursor to the desired camera using the [D] or

[C] button.

2. Select ON or OFF with the JogDial, and press the

JogDial.
The default is ON.

ON: Live image of the channel is displayed.
OFF: Blackout image is displayed.

3. Repeat steps 1 and 2 until all channels are pro-

grammed, or press the [SETUP/ESC] button to return to
the SWITCHER SETUP menu,

• Recording will be carried out regardless of this set-

ting.

• The recorded images of the channel will be played

back and displayed on the monitor even if OFF is
selected.

● Secret View Setup (SECRET VIEW

This will help to watch shoplifters without being recognized
in a store where, for example, cameras and spot monitors
are installed on the sales floors and a multiscreen monitor is
installed in a control room. The spot monitor will black out
its screen when the multi-screen monitor is switched to the
single live mode to focus on the potential shoplifter.
The default setting is OFF.