Panasonic WV-CP160 Manual Do Utilizador

2. Move the CAMERA ID to the desired

position by pressing

3. Press

to fix the position of the

CAMERA ID. The mode returns to the
previous CAMERA ID menu.

Notes:

• The CAMERA ID stops at the edges of the monitor screen.
• The CAMERA ID moves faster if any of

is kept pressed for a sec-

ond or more.

2. Light Control Setting (ALC/ELC)

You can select the light control mode accord-
ing to the lens type.

ALC:

If you use the auto iris lens, select this

parameter.

ELC:

If you use a fixed or manual iris lens,

select this parameter.

1. Move the cursor to the ALC/ELC parame-

ter.

2. Select ALC or ELC.

2-1. ALC Mode with SUPER-D2 ON

Super Dynamic 2 Function (SUPER-D2)

The important object in a scene is usually placed in the center of the monitor’s screen. In
SUPER-D2 mode, the dynamic range is 64 times greater than a conventional camera. This
allows you to see all the details on the monitor, even under difficult lighting condition. You
can use the SUPER-D2 function if you select ALC.

1. After selecting ALC, press

to open

the ALC CONT menu.

2. Move the cursor to the SUPER-D2

parameter and select ON.

3. If you want to adjust the video output

level, move the cursor to the "I" posi-
tion. Adjust to the desired level by
pressing or .

SETTING PROCEDURES

** ALC CONT **
BACK LIGHT COMP

SUPER-D2 OFF

MASK SET

LEVEL ...I.....
- +

RET END

↵

** ALC CONT **
BACK LIGHT COMP

SUPER-D2 ON

LEVEL ...I.....
- +

RET END

1. Camera Identification (CAMERA ID) Setting

You can use the camera identification (CAMERA ID) to assign a name to the camera. The
camera ID consists of up to 16 alphanumeric characters. The camera ID display can be
selected on or off on the monitor screen.

To edit the CAMERA ID

1. Move the cursor to the CAMERA ID parameter.

2. Press

. The CAMERA ID menu appears. The cursor on the letter “0” is highlighted.

3. Move the cursor to the character you

want to edit by pressing

4. After selecting the character, press

. The selected character appears

in the editing area. (The pointer in the
editing area moves to the right auto-
matically at this moment.)

5. Repeat the steps above until all char-

acters are edited.

To enter a blank space in the CAMERA ID

Move the cursor to SPACE and press

To replace a specific character in the CAMERA ID

1. Move the cursor to the editing area by pressing

2. Move the pointer to the character to be replaced by pressing

. Then move

the cursor to the character area and select a new character.

3. Press

to determine the CAMERA ID.

To erase all characters in the editing area

Move the cursor to RESET and press

. All characters in the editing area disappear.

To determine the display position of the CAMERA ID

1. Move the cursor to POSI, and press

. The display shown below ap-

pears and the CAMERA ID is highlight-
ed.

WV-CP160

Highlighted

0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ

SPACE
POSI RET END RESET

................

Character Cursor

Pointer

Character
Area

Command

Editing
Area

CAMERA ID menu

** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
WHITE BAL ATW

AUDIO LEVEL ....I....
- +

END SET UP ENABLE

↵

** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
WHITE BAL ATW

AUDIO LEVEL ....I....
- +

END SET UP ENABLE

↵