BMW serie 3 sport wagon 2002 Manual Do Utilizador

135

Overview

Controls

Maintenance

Repairs

Data

Index

Towing the vehicle

Tow fitting

The screw-in tow fitting is stored in the
onboard tool kit; be sure that it remains
in the vehicle at all times. This fitting is
designed for installation in the tow
sockets located at the front and rear of
the vehicle, and is intended for towing
on paved road surfaces only. This fitting
should not be used to pull a vehicle out
of deep snow, mud, sand, etc.
Always comply with all applicable
towing laws and regulations.

Access to tow sockets

Front:
Press out the cover panel with a screw-
driver inserted in the recess at the top.

Rear:
Press out the cover panel with a screw-
driver inserted in the recess at the top.

Screw the tow fitting all the way
in. Failure to screw the fitting all

the way in can cause thread damage.
Never attach tie-down hooks, chains,
straps, or tow hooks to tie rods, control
arms, or any other part of the vehicle
suspension, as severe damage to these
components will occur, leading to
possible accidents.

Towing with a commercial tow
truck

Do not tow with sling-type equipment

Use wheel-lift or flatbed equipment

Please comply with applicable state
towing laws.

Never allow passengers to ride in
a towed vehicle for any reason.

Never attach tie-down hooks, chains,
straps, or tow hooks to tie rods, control
arms, or any other part of the vehicle
suspension, as severe damage to these
components will occur, leading to
possible accidents.