BMW x5 2003 Manual Do Utilizador

112

n

The BMW Universal Transmitter 
replaces up to three hand-held trans-
mitters of different devices such as 
garage door openers, alarm systems, or 
door locking systems. The BMW 
Universal Transmitter recognizes and 
learns the transmitted signal of each of 
the original hand-held transmitters. 

The signal of an original hand-held 
transmitter can be programmed on one 
of the three channel keys. Following 
that, each of the devices can be actu-
ated with the appropriately-programmed 
channel key. The indicator lamp flashes 
to confirm transmission of the signal. 

If the vehicle is sold, the memory of the 
channel keys should be cleared as 
described on page 

During programming and before 
every remote actuation of a 

programmed device by the BMW 
Universal Transmitter, check to be sure 
that there are no persons, animals or 
objects within the actuation range of 
the device in order to prevent possible 
injuries or damage. Also, comply with 
the safety precautions of the original 
hand-held transmitter.

<

 

To Canadian residents:
During programming, your hand-

held transmitter may automatically stop 
transmitting after two seconds. This 
may not be long enough to program the 
BMW Universal Transmitter. If you are 
programming from one of these hand-
held transmitters, the Universal Trans-
mitter's light may begin to flash in a 
series of double-blinks. If this occurs, 
continue to hold the button of the 
Universal Transmitter while you reacti-
vate your hand-held transmitter. You 
may have to repeat this function several 
times while programming.

<

 

Before programming, read the 
User information section on 

<

 

If this symbol is present on the 
packaging or in the instructions 
of the original hand-held trans-

mitter, it may be assumed that this 
hand-held transmitter is compatible 
with the BMW Universal Transmitter. 

Online Edition for Part No. 01 41 0 157 098 - © 08/02 BMW AG