BMW x5 2003 Manual Do Utilizador

Parking brake

Manual transmission

The parking brake is primarily designed
to prevent the vehicle from rolling while
parked. It operates against the rear
wheels.

To engage

The lever engages automatically when
you pull it up and the indicator lamp
comes on in the instrument cluster in
ignition key position 2, refer to
pages

and

To release

Pull up slightly on the lever, press the
button and lower the lever.

530de262

If, in exceptional circumstances, it
should be necessary to engage

the parking brake while the vehicle is in
motion, do not pull it with excessive
pressure. Keep your thumb pressed
against the release button while care-
fully pulling up the lever to apply mod-
erate pressure.
Excessive pressure can lead to over-
braking and loss of traction – fishtailing
– at the rear axle.
The brake lamps do not come on when
the parking brake is engaged.
Vehicles with manual transmission:
Always engage the parking brake when
parking on slopes and inclined sur-
faces. Even placing the gearshift lever
in 1st gear or reverse may not provide
adequate resistance to rolling.
Vehicles with automatic transmission:
Place the selector lever in Park.

To avoid corrosion, apply the parking
brake lightly from time to time when
coasting to a standstill at a traffic
signal, for instance, provided that it is
safe to do so.

Press the clutch pedal all the way down
each time you shift, pressing the gear-
shift lever into its proper end position.

Depress the clutch when starting the
vehicle, too, otherwise, the interlock
will prevent the engine from starting if
the clutch is not depressed.

360de044