BMW serie 7 1999 Manual Do Utilizador

Página de 211
164
n
Lamps and bulbs
For checking and adjusting head-
lamp aim, please contact your 
BMW center.
<
 
1 Low beam headlamps
H1 bulb, 55 watt 
2 High beams
H7 bulb, 55 watt 
The H7 bulb is pressurized. There-
fore, wear safety glasses and pro-
tective gloves. Failure to observe this 
precaution could lead to injury if the 
bulb is accidentally damaged during re-
placement.
<
 
380de099
1 Remove the cover
2 Pull off the connector at the bulb
3 Detach the wire clamp
4 Replace the bulb
5 Install in the opposite order of work.
3 Parking lamp
5 watt bulb
1 Pull the bulb holder out
2 Remove and replace the bulb.
When cleaning the headlamps, 
please observe the following:
> Do not clean by wiping with a dry 
cloth (scratches). Never use abra-
sives or strong solvents to clean the 
covers
> Remove dirt and contamination 
(such as insects) by soaking with 
BMW Car Shampoo and then rinsing 
with plenty of water
> Always use a deicer spray to remove 
accumulated ice and snow – never 
use a scraper.
<
 
Xenon lamps
*
The service life of these bulbs is very 
long and the probability of a failure is 
very low, provided that they are not 
switched on and off an unusual number 
of times. If one of these bulbs should 
nevertheless fail, it is possible to con-
tinue driving with great caution using 
the fog lamps, provided traffic laws in 
your area do not prohibit this.
Because of the extremely high 
voltages involved, any work on the 
lighting system should be carried out by 
technically-qualified personnel only. 
Otherwise, there is a risk of fatal injury.
<
 
Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG