Yamaha 02R Manual Do Utilizador

Secondary Recording Tutorial

The Digital Recording Console 02R has eight auxiliary send channels.

AUX7 and AUX8 are used to feed the internal effects processors, with the 
signal remaining entirely in the digital domain.

The other auxiliary sends – AUX1 through AUX6 – can be used to feed 
external signal processors and effects units, foldback amplifiers, or 
multitrack recording equipment. AUX5 and AUX6 can also be used to 
construct a monitor mix and routed directly to either the studio or control 
room monitors. When a send is used to feed an external effects processor, 
the processed signal can be returned via one of the stereo input channels or 
an unused input channel.

There are two different ways to access the auxiliary send channels:

These buttons access the Display Functions that set the auxiliary send 
levels for the recording console.

•

The [AUX 1] to [AUX 6] buttons set the auxiliary send levels to the 
corresponding auxiliary bus. You can also select whether to send the 
signal pre or post fader.

•

The [AUX 7] and [AUX 8] buttons also set the send levels to the 
corresponding auxiliary bus and can be sent pre or post fader. These 
two sends are routed to the internal effects unit. Therefore, the buttons 
also allow you to select and set the effects parameters.

When you press any one of these buttons, the faders switch from 
controlling the input levels to controlling the auxiliary send levels.

These buttons and controls set the auxiliary send levels for the currently 
selected channel.

•

The [AUX 1] to [AUX 8] buttons allow you to select the auxiliary buses 
you want to send the selected channel signal to.

•

The SEND LEVEL rotary encoder is used to set the level – indicated by 
the adjacent LED bargraph.

•

The [ON] button is used to turn the send on or off.