Yamaha 02R Manual Do Utilizador
44
Secondary Recording Tutorial
Digital Recording Console 02R Getting Started Guide
The PRE icon becomes the POST icon and is highlighted in reverse video
when the signal is pre-fader.
when the signal is pre-fader.
4.
To change the signal level, adjust the fader for MIC/LINE 1 until
the desired value is obtained.
the desired value is obtained.
You can use the rotary encoders for the tape returns or press the [FLIP]
button. Then the tape return channels can be operated by the faders. The
effect returns can only be adjusted with the rotary encoders.
button. Then the tape return channels can be operated by the faders. The
effect returns can only be adjusted with the rotary encoders.
You can also use the SEND LEVEL encoder in the AUX group of the
SELECTED CHANNEL controls. You must press the corresponding
[AUX 1] button to make certain you are adjusting the signal level for the
correct auxiliary channel.
SELECTED CHANNEL controls. You must press the corresponding
[AUX 1] button to make certain you are adjusting the signal level for the
correct auxiliary channel.
Note:
In order to adjust the auxiliary send level with the SEND LEVEL encoder,
you must first select the send channel with the corresponding button of the
SELECTED CHANNEL – AUX controls
SELECTED CHANNEL – AUX controls
SEND LEVEL