Yamaha clavinova clp-370 Manual Do Utilizador

Connections

CLP-370/340/330, CLP-S308/S306

 

Owner’s Manual

By connecting the instrument to a USB storage device with a standard USB cable, you can save data 
you’ve created to the connected device, as well as read data from the connected device.

A USB storage device, such as a floppy disk drive, hard disk drive, CD-ROM drive, flash 
memory reader/writer, etc., can be connected to the 

 terminal. Other 

USB devices such as a computer keyboard or mouse cannot be used. 

Avoid frequently turning the power on/off to the USB storage device, or connecting/disconnect-
ing the cable too often. Doing so may result in the operation of the instrument “freezing” or 
hanging up. While the instrument is accessing data (such as during Save, Delete, Load and Format 
operations) or is mounting the USB storage device (shortly after the connection: until the “LOAD 
TO USER” LED flash stops), do NOT unplug the USB cable, do NOT remove the media from the 
device, and do NOT turn the power off to either devices. Doing so may corrupt the data on either 
or both devices.

The CLP-370/340 has two 

 terminals; one on the left of the panel and 

one on the terminal at the bottom.

Both are the same terminal; however, both cannot be used at the same time. Use the 

 switch to select the desired terminal. Switching to “A” selects the terminal on 

the left of the panel, while switching to “B” selects the terminal panel at the bottom.
When the device is mounting, the FILE “LOAD TO USER” indicator flashes. When the 
mounting operation is completed, the indicator goes off.

While the instrument is accessing data (such as in the Save, Export, Load, Delete or Format opera-
tions) or is mounting the USB storage device (shortly after the connection: until the FILE LOAD 
LED flash stops), do NOT use the [SELECT] switch. Doing so may corrupt the media or data.

Disconnect the optional USB storage device connected to the [USB TO DEVICE] A terminal before 
closing the key cover. Closing the cover with the device still connected may damage the device.

When executing a file-related operation with a connected USB storage device, a “For” 
message may appear, indicating that the device or media may be unformatted. If this 
happens, format the media (page 40).

The format operation overwrites any previously existing data. Proceed with caution.

CD-ROM drive
Although CD-R/RW drives can be 
used to read data to the instru-
ment, they cannot be used for 
saving data.

Do not use a non-ID SmartMedia 
card.

Number of USB storage devices
Only one USB storage device can 
be connected to the 

DEVICE] terminal. This instru-
ment can recognize only a single 
drive in a USB storage device. If 
one storage device contains more 
than one drive, only one drive will 
be automatically selected and 
recognized.

(CLP-370/340) If you connect 
USB storage devices to both USB 
[TO DEVICE] terminals, the 
devices may not operate properly.

Do not connect a USB hub to the 
instrument.

Remove the USB storage device 
from the instrument before you 
switch the A/B terminals.

Though the instrument supports 
the USB 1.1 standard, you can 
connect and use a USB 2.0 stor-
age device with the instrument. 
However, note that the transfer 
speed is that of USB 1.1.

The instrument does not necessarily support all commercially available USB storage devices. Yamaha can-
not guarantee operation of USB storage devices that you purchase. Before purchasing USB storage devices, 
please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner’s Man-
ual) for advice, or visit the following web page:

http://music.yamaha.com/download/

USB [TO DEVICE] terminal A

USB [TO DEVICE] terminal B

Select the desired terminal