Yamaha CLP-F01 Manual Do Utilizador

CLP-F01

   Selecting & Playing Voices

You can play two voices simultaneously across the entire range of the keyboard. In this way, you 
can simulate a melody duet or combine two similar voices to create a thicker sound.

Press two voice buttons at the same time (or press one voice button while hold-
ing another). The voice indicators of both selected voices will light when Dual 
mode is active.

• According to the voice numbering 

priority shown in the diagram on 
the right, the lower value voice 
number will be designated as Voice 
1 (the other voice will be desig-
nated as Voice 2).

The CLP-F01 Function mode provides access to a number of other Dual mode 
functions, such as volume balance setting or octave setting (page 44). (If you do 
not set Dual mode functions, the appropriate setting will be set in each voice by 
default.)

To return to the normal single-voice play mode, press any single voice button.

Dual and Split (page 29) modes 
cannot be engaged at the same 
time.

[VARIATION] in Dual Mode 
The [VARIATION] button’s indi-
cator will light if the variation is 
engaged for either or both of the 
Dual mode voices. While Dual 
mode is engaged, the [VARIA-
TION] button can be used to 
turn the variation for both voices 
on or off.
To turn the variation on or off for 
only one of the voices, hold the 
voice button for the other voice 
and press the button of the voice 
for which you want to change 
the variation.

[REVERB] in Dual Mode
The reverb type assigned to 
Voice 1 will take priority over the 
other. (If the reverb is set to OFF, 
Voice 2 reverb type will be in 
effect.) Reverb depth setting via 
the panel controls (i.e., pressing 
the [–/NO] or [+/YES] buttons 
while holding the [REVERB] but-
ton — see page 24) will be 
applied only to Voice 1.

[EFFECT] in Dual Mode
Depending on the conditions, 
one effect type may take priority 
over the other. Depth will be 
decided according to the depth 
default value of the voice combi-
nation. However, using function 
F3 (page 44) you can adjust the 
depth value for each voice to 
your liking.
Effect depth setting via the panel 
controls (i.e., pressing the [–/
NO] or [+/YES] buttons while 
holding the [EFFECT] button — 
see page 25) will be applied only 
to Voice 1.

Voice numbering priority