Yamaha CLP-990 Manual Do Utilizador
46
CLP-990
Recording to the third or more tracks [EXTRA TRACKS]
You can continue recording other parts into tracks 3–16 [EXTRA TRACKS] one by one.
Procedure
1.
Hold down the [REC] button in step 2 in the “Record-
ing to [TRACK2]” on page 45 and use the B [–]/[+] but-
tons to select a recording track (3–16).
ing to [TRACK2]” on page 45 and use the B [–]/[+] but-
tons to select a recording track (3–16).
2.
While holding down the [REC] key, press the [EXTRA
TRACKS] button.
TRACKS] button.
Then, follow the procedure beginning with Step 4 on page 42.
Other recording techniques
Adding data to or recording over an existing song
The previous section explains how to record your performance from the beginning by selecting a blank “P-
000: NewSong.” You can also add your performance to or overwrite existing songs (such as 50 preset songs
[P-001—P-050], commercially-available music data [see page 60], or your old recorded performances [see
page 50]).
000: NewSong.” You can also add your performance to or overwrite existing songs (such as 50 preset songs
[P-001—P-050], commercially-available music data [see page 60], or your old recorded performances [see
page 50]).
Procedure
If you record on a track that
already has data, the exist-
ing data on the track will be
lost.
already has data, the exist-
ing data on the track will be
lost.
1.
Select a song for recording (P-001 – P-050).
Select one of the preset songs (P-001–P-050) instead of “P-000:
NewSong” as described in Step 1 of “Recording to [TRACK1]” on
page 41. To select a song from commercial music data sold in stores or
from already-recorded data, see Steps 1 and 2 on page 57.
NewSong” as described in Step 1 of “Recording to [TRACK1]” on
page 41. To select a song from commercial music data sold in stores or
from already-recorded data, see Steps 1 and 2 on page 57.
To continue recording, follow the procedure described in “Recording a New Song” from page 41 to 46.
A
B
C
D
NO
YES
select a recording track (3-16)
NOTE