Yamaha CLP-990 Manual Do Utilizador

If you record a song, then turn off the power to the Clavinova, the song will be erased. To save the recorded 
song, you must save it into the Clavinova Storage memory or to a floppy disk. (To save a song to a floppy 
disk, refer to the next section [SaveToDisk].) You can also save the preset songs, disk songs, and additional or 
overwriting recordings (page 46) to Storage memory.

See page 51 the basic operation information. The following is a detailed pro-
cedure of Step 4.

To move the cursor (a small underline), use the C [–]/[+] buttons.
To insert a space, press the C [–]/[+] buttons simultaneously.
To select a character on the cursor, use the D [–]/[+] buttons.
To delete a character, press the D [–]/[+] buttons simultaneously.

You can use up to 58 characters for a song name. If the name is longer 
than the screen, use the C [–]/[+] buttons to move the cursor and 
scroll the name.

“Execute?

→

”: Do you wish 

to execute the operation?

“Sure?

→

”: Are you sure?

“Executing”: The Clavinova 
is executing the operation.

“Completed”: The operation 
is complete.

Press the B [+ (YES)] button located next to “Execute?

→

”

“Sure?

→

.” appears on the screen. Press the B [+ (YES)] button again 

to confirm the operation. (To cancel the operation, press the B [–
(NO)] button.)
The Clavinova displays “Executing” on the screen during the opera-
tion. When the operation is complete, “Completed” appears.
The song is automatically numbered as “Mxx,” where “M” means 
“Memory” and “xx” is a number.

Do not turn off the power 
while the screen displays 
“Executing.”

If Storage memory contains one or more songs, and you save a new song, the Clavi-
nova automatically sorts the songs alphabetically and renumbers them.

A

B

C

D

NO

YES

• You can change the type 

of characters on the 
screen using the Char-
acterCode parameter.

• When you select a saved 

song later, the name with 
an extension “.MID” will 
appear.