Yamaha CRW2100SX Manual Do Utilizador

22

1 When the computer’s operating system is loading, your SCSI card will be

recognized and you will be prompted to install the drivers for it.  Follow the
on-screen instructions and choose to reboot your computer at the end of the
driver installation procedure.

n For details about installing the drivers for your SCSI card, refer to the

documentation that came with it.  Also refer to the documentation that came with
your computer’s operating system.

2 After the computer’s operating system (Windows 95/98/98 Second Edition)

has loaded, open the “Control Panel” and double-click on the “System” icon.
Select the “Device Manager” tab and double-click on “CDROM.”  If the drive
has been correctly installed, it should be listed as shown below.  Similarly,
double-click on “SCSI controllers” and the SCSI card should be listed as
shown below if it has been properly installed.

n For details about how to use the operating system, refer to the documentation that

came with it.

n If there is a 

 or 

 mark etc. next to the icon for the CRW2100SX drive or the

SCSI card, this means that it has not been installed correctly.

n When using Windows NT, you can verify by opening the “Control Panel,” double-

clicking on “SCSI Adapter” and clicking the “Devices” tab.

n For Windows 2000, double-click “System” in the “Control Panel,” select the

“Hardware” tab, and click the “Device Manager” button in “System Properties.”

* This is a screen shown in the Windows 98 

Second Edition environment.