Yamaha CRW2100SX Manual Do Utilizador

This section explains how to operate the CRW2100SX drive after you have
installed it. You can load and eject a disc (as described below) only when the
CRW2100SX is powered on.

1 Open the tray by pressing the Eject button on the CRW2100SX drive’s front

panel.

2 Place the disc onto the tray with its label or printing facing upward.
3 Press the Eject button to close the tray.

n Do not push or pull the tray using excessive force.  Doing so can damage the drive

or the disc.  Instead, always use the Eject button to open or close the tray.

1 Open the tray by pressing the Eject button on the CRW2100SX drive’s front

panel.

2 Remove the disc from the tray.
3 Press the Eject button to close the tray.

n It may not be possible to eject the disc tray while a disc is being read or in other

situations, depending on the SCSI command.

n Only remove the disc after the disc tray has opened fully.  Otherwise, you risk

damaging the drive or the disc.

24