Yamaha EM5014C Manual Do Utilizador
22
EMX5014C Owner’s Manual
Front & Rear Panels
Reference
Digital Effects Section
I
SEND Jack
• EFF
This unbalanced phone output jack outputs the signal
from the EFFECT bus. You use this jack, for example,
to connect to an external effector. You can then return
the signal by connecting the external effector to any of
the LINE jacks on channel pairs 7/8 to 13/14.
This unbalanced phone output jack outputs the signal
from the EFFECT bus. You use this jack, for example,
to connect to an external effector. You can then return
the signal by connecting the external effector to any of
the LINE jacks on channel pairs 7/8 to 13/14.
If you are returning a signal from an external effector
into a LINE jack on any channel pair 7/8 to 13/14,
please be sure to turn the EFFECT knob for that
channel pair to “0”.
into a LINE jack on any channel pair 7/8 to 13/14,
please be sure to turn the EFFECT knob for that
channel pair to “0”.
• AUX1, AUX2
These unbalanced phone jack outputs monaural moni-
tor signals from the AUX1 and AUX2 buses, respec-
tively. You use these jacks, for example, to connect to
an effector or to a cue box or other such monitoring
system.
These unbalanced phone jack outputs monaural moni-
tor signals from the AUX1 and AUX2 buses, respec-
tively. You use these jacks, for example, to connect to
an effector or to a cue box or other such monitoring
system.
J
PROGRAM Dial
Selects the type of effect to be used. You can select
from 16 different effect types, as follows.
from 16 different effect types, as follows.
K
PARAMETER Control
Adjusts the parameter (depth, speed, etc.) associated
with the selected effect type.
with the selected effect type.
The mixer saves the last value used with each effect
type. When you change to a different effect type, the
mixer automatically restores the value that was previ-
ously used with that type (regardless of the current
position of the PARAMETER knob). But note that all
values return to their defaults at power-off.
type. When you change to a different effect type, the
mixer automatically restores the value that was previ-
ously used with that type (regardless of the current
position of the PARAMETER knob). But note that all
values return to their defaults at power-off.
L
AUX1/2 Controls
Each knob adjusts the level of the effected sound into
the corresponding AUX1 and AUX2 buses.
the corresponding AUX1 and AUX2 buses.
I
J
L
K
O
N
M
No.
Program
Parameter
1
REVERB HALL 1
REVERB TIME
2
REVERB HALL 2
REVERB TIME
3
REVERB ROOM 1
REVERB TIME
4
REVERB ROOM 2
REVERB TIME
5
5
5
5
REVERB STAGE 1
REVERB TIME
6
6
6
6
REVERB STAGE 2
REVERB TIME
7
7
7
7
REVERB PLATE
REVERB TIME
8
8
8
8
DRUM AMBIENCE
REVERB TIME
9
KARAOKE ECHO
DELAY TIME
0
VOCAL ECHO
DELAY TIME
A
CHORUS 1
LFO FREQ
B
CHORUS 2
LFO FREQ
C
C
C
C
FLANGER
LFO FREQ
D
D
D
D
PHASER
LFO FREQ
E
E
E
E
AUTO WAH
LFO FREQ
F
F
F
F
DISTORTION
DRIVE
NOTE