Yamaha EMX66M Manual Do Utilizador
Installing an optional rack mount kit
23
EMX66M—Owner’s Manual
Installing an optional rack mount kit
You can rack-mount the EMX66M using an
optional rack mount kit (RK-88).
optional rack mount kit (RK-88).
Rack mount kit RK-88
• Bracket
×
2
• Screw
×
6
Before you rack-mount the EMX66M, make sure
that sufficient ventilation will be maintained.
(Never install the unit in a sealed rack.)
If you are going to install multiple devices includ-
ing the unit in a rack, keep a 1U space or more
between the devices. Use a blank panel with holes
for ventilation if you wish to insert a panel
between the devices.
You will need a 7U space to install the rack
mount. After installation, the unit will project 62
mm from the front surface of the rack.
that sufficient ventilation will be maintained.
(Never install the unit in a sealed rack.)
If you are going to install multiple devices includ-
ing the unit in a rack, keep a 1U space or more
between the devices. Use a blank panel with holes
for ventilation if you wish to insert a panel
between the devices.
You will need a 7U space to install the rack
mount. After installation, the unit will project 62
mm from the front surface of the rack.
Installing the rack mount bracket
1 Remove the carrying handle by loosening and
removing four screws.
2 Attach one of the rack mount brackets to the side
of the EMX66M using three included screws.
3 Attach the other rack mount bracket in the same
way.
62