Yamaha ga24-12 Manual Do Utilizador

 

Keep the unit away from locations where it is 
likely to be exposed to high temperatures or 
humidity — such as near radiators, stoves, etc. 
Also avoid locations which are subject to exces-
sive dust accumulation or vibration which could 
cause mechanical damage.

 

The unit has ventilation slots on the top, rear and 
bottom panels. Do not block these vents. 

 

Strong physical shocks to the unit can cause dam-
age. Handle it with care.

 

This product contains no user-serviceable parts. 
Refer all maintenance to qualified Yamaha service 
personnel. Opening the case and/or tampering 
with the internal circuitry voids the warranty.

 

Always turn the power OFF before connecting or 
disconnecting cables. This is important to pre-
vent damage to the unit itself as well as other con-
nected equipment.

 

Always plug and unplug cables — including the 
AC power cord — by gripping the connector, not 
the cord.

 

Never use solvents such as benzine or thinner to 
clean the unit. Wipe clean with a soft, dry cloth.

 

Make sure that the power supply voltage specified 
on the rear panel matches your local AC mains 
supply. Also make sure that the AC mains supply 
can deliver more than enough current to handle 
all equipment used in your system.

 

 

Monaural input channels......................................2
Stereo input channels............................................4

 

Variable/Fix select section.....................................6
Mix section ............................................................6
ST (Stereo) section ................................................9
AUX RETURN section........................................10
MATRIX section..................................................11
C-R MONI (Control room monitor) section
PHONES (headphones) section .........................12
TAPE IN section..................................................13
TALKBACK section ............................................14
METER SELECT section.....................................15
Meter bridge ........................................................15

 

 

General specifications .........................................20
Input specifications .............................................21
Output specifications ..........................................21
Dimensions..........................................................22
Block and Level diagram.....................................23

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT: The wires in this mains lead are coloured in accordance with 
the following code:

          GREEN-AND-YELLOW     :  EARTH

          BLUE                                       :  NEUTRAL

          BROWN                                 :  LIVE

As the colours of the wires in the mains lead of this apparatus may not 
correspond with the coloured markings identifying the terminals in your 
plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be connected to 
the terminal in the plug which is marked by the letter E or by the safety earth 
symbol or coloured GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal which 
is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal 
which is marked with the letter L or coloured RED.

* This applies only to products distributed by YAMAHA KEMBLE 

MUSIC (U.K.) LTD.