Yamaha YDP-223 Manual Do Utilizador

YDP-223

   Appendix/Anhang/Annexe/Apéndice

If you’re already very familiar with MIDI, or are using a 

computer to control your music hardware with computer-
gener-ated MIDI messages, the data provided in this section 
can help you to control the YDP-223.

Falls Sie bereits mit MIDI vertraut sind oder einen 

Computer zur Erzeugung von MIDI-Steuermeldungen für die 
Instrumente verwenden, können Sie sich zur Steuerung des 
YDP-223 nach den im folgenden Abschnitt aufgeführten 
Spezifikationen richten.

Si vous êtes très familier avec l’interface MIDI ou si vous 

utilisez un ordinateur pour commander votre matériel de 
musique au moyen de messages MIDI générés par 
ordinateur, les données suivantes vous seront utiles et vous 
aideront à commander le YDP-223.

SI usted está ya familiarizado con MIDI, o si emplea una 

computadora para controlar sus aparatos musicales con 
mensajes MIDI generados por computadora, los datos 
proporcionados en esta sección le ayudarán a controlar la 
YDP-223.

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)
kk =

Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /  
Receive: 00H ~ 7FH = C-2 ~ G8)*

vv =

Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] (reception only)

8nH = Note OFF event (n = channel number)
kk =

Note number: 00H ~ 7FH = C-2 ~ G8

vv =

Velocity

* If received value exceeds the supported range for the 

selected voice, the note is adjusted by the necessary num-
ber of octaves.

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)
cc =

Control number

vv =

Data Range

ccH

Parameter

Data Range (vvH)

00H

Bank Select MSB

00H:Normal

20H

Bank Select LSB

00H...7FH

Bank selection processing does not occur until receipt of 
next Program Change message.

ccH

Parameter

Data Range (vvH)

07H

Volume MSB

00H...7FH

ccH

Parameter

Data Range (vvH)

0BH

Expression MSB

00H...7FH

ccH

Parameter

Data Range (vvH)

40H

Damper MSB

00H...7FH

ccH

Parameter

Data Range (vvH)

42H

Sostenuto

00H-3FH:off, 40H-7FH:on

ccH

Parameter

Data Range (vvH)

43H

Soft Pedal

00H-3FH:off, 40H-7FH:on

ccH

Parameter

Data Range (vvH)

5BH

Effect1 Depth

00H...7FH

Adjusts the reverb send level.

ccH

Parameter

Data Range (vvH)

5EH

Effect4 Depth

00H...7FH

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)
cc =

Control number

vv =

Data Range

ccH

Parameter

Data Range (vvH)

78H

All Sound Off

00H

Switches off all sound from the channel. Does not reset Note 
On and Hold On conditions established by Channel Messages.

ccH

Parameter

Data Range (vvH)

79H

Reset All Controllers

00H

Resets controllers as follows.
Controller

Value

Expression

127 (max)

Damper Pedal

0 (off)

Sostenuto

0 (off)

Soft Pedal

0 (off)

ccH

Parameter

Data Range (vvH)

7AH

Local Control

00H (off), 7FH (on)

ccH

Parameter

Data Range (vvH)

7BH

All Notes Off

00H

Switches OFF all the notes that are currently ON on the spec-
ified channel. Any notes being held by the damper or soste-
nuto pedal will continue to sound until the pedal is released.

ccH

Parameter

Data Range (vvH)

7CH

Omni Off

00H

Same processing as for All Notes Off.

ccH

Parameter

Data Range (vvH)

7DH

Omni On

00H

Same processing as for All Notes Off.

ccH

Parameter

Data Range (vvH)

7EH

Mono

00H

Same processing as for All Sound Off.

ccH

Parameter

Data Range (vvH)

7FH

Poly

00H

Same processing as for All Sound Off.

• When control change reception is turned OFF in the Function 

mode, control change data will not be transmitted or received 
except for Bank Select and Mode messages.

• Local on/off, OMNI on/off are not transmitted. (The appropriate 

note off number is supplied with “All Note Off” transmission).

• When a voice bank MSB/LSB is received, the number is 

stored in the internal buffer regardless of the received order, 
then the stored value is used to select the appropriate voice 
when a program change message is received.

• The Multi-timbre and Poly modes are always active. No 

change occurs when OMNI ON, OMNI OFF, MONO, or POLY 
mode messages are received.