Yamaha YSP-4100BL Manual Do Utilizador

SOUND OUT (Sound output redirection)
Use to redirect the output of audio signals. Audio output 
of all the channels switches simultaneously.
Choices: SPEAKER*, PRE OUT
• Select SPEAKER to output sounds from this unit.
• Select PRE OUT to output audio signals from the PRE 

OUT jacks of this unit. You also need to configure the 
parameters from “BASS OUT” to “LFE Level” 
described below.

y

• The parameters from “BASS OUT” to “LFE Level” are settings 

for the PRE OUT jacks when they are selected as audio output 
jacks.

BASS OUT (Bass sound output redirection)
Use to redirect the output of bass sounds. The settings 
under “BASS OUT” are for the PRE OUT jacks.
Choices: SUBWOOFER, FRONT*
• Select SUBWOOFER to output bass sounds from the 

subwoofer.

• Select FRONT to output bass sounds from the external 

front right and left speakers.

Front SP Size (Front speaker size for PRE OUT)
Select the size of external front speakers.
Choices: Small, Large*
• Select Small if the diameter of the front speaker’s 

woofer is smaller than 16 cm. Low-frequency parts of 
front right and left channel signals are output from the 
subwoofer.

Center SP Size (Center speaker size for PRE 
OUT)
Select the size of external center speakers.
Choices: None, Small*
• Select None if no center speaker is used. Center 

channel signals are mixed into the front right and left 
speakers.

• Select Small if a center speaker is used. Low-frequency 

parts of center channel signals are output from the 
subwoofer (or mixed into the front right and left 
channel signals if subwoofer is not available).

PRE OUT Volume (PRE OUT volume)
Adjust the output level of the PRE OUT jacks.
Control range: –30.0 dB to 0.0 dB
Initial setting: –18.0 dB

LFE Level (Low-frequency effect level for PRE 
OUT)
Adjust the low-frequency effect output level of the PRE 
OUT jacks. This setting is effective only when this unit 
decodes Dolby Digital or DTS signals.
Control range: –20 dB to + 0 dB*

■ INPUT ASSIGNMENT (Input assignment)

→ INPUT MENU → INPUT 

ASSIGNMENT
Use to change the key assignments of input jacks on this 
unit. The parenthetic references displayed in the menu 
screen indicate the initial settings.
See also: “AUDIO SELECT” (page 39)

y

• Press G 

  to proceed to the next page.

AUDIO1
Select the key to which the AUDIO IN (TV) jacks are 
assigned.
Choices: TV*, AUX1, AUX2, HDMI1, HDMI2, HDMI3, 
HDMI4 

• The input already selected in “AUDIO2” is not displayed. To set 

the input selected in “AUDIO2”, change “AUDIO2” parameter, 
and then reconfigure.

AUDIO2
Select the key to which the AUDIO IN (AUX 1) jacks are 
assigned.
Choices: AUX1*, AUX2, HDMI1, HDMI2, HDMI3, 
HDMI4, TV

• The input already selected in “AUDIO1” is not displayed. To set 

the input selected in “AUDIO1”, change “AUDIO1” parameter, 
and then reconfigure.

OPTICAL1
Select the key to which the DIGITAL IN (TV) jack is 
assigned.
Choices: TV*, AUX1, AUX2, HDMI1, HDMI2, HDMI3, 
HDMI4 

• The input already selected in “OPTICAL2” or “COAX” is not 

displayed. To set the input selected in one of these parameters, 
change the corresponding parameter, and then reconfigure.

OPTICAL2
Select the key to which the DIGITAL IN (AUX 1) jack is 
assigned.
Choices: AUX1*, AUX2, HDMI1, HDMI2, HDMI3, 
HDMI4, TV

• The input already selected in “OPTICAL1” or “COAX” is not 

displayed. To set the input selected in one of these parameters, 
change the corresponding parameter, and then reconfigure.

COAX
Select the key to which the DIGITAL IN (AUX 2) jack is 
assigned.
Choices: AUX2*, HDMI1, HDMI2, HDMI3, HDMI4, TV, 
AUX1

• The input already selected in “OPTICAL1” or “OPTICAL2” is 

not displayed. To set the input selected in one of these 
parameters, change the corresponding parameter, and then 
reconfigure.

■ INPUT RENAME (Input rename)

→ INPUT MENU → INPUT RENAME

Use to change the name of the input source displayed 
when the input source is selected. Select a name from 
templates, or enter an original name.

Press G 

GENTER

G  

/ 

G  

/ 

G 

IRETURN

I

G