Yamaha YSP-4100BL Manual Do Utilizador

Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if 
a remote control code is set. In this case, operate the component using the supplied remote control.

You can control external components using the following 
keys on the remote control of this unit by setting the 
appropriate remote control codes (page 49). Before 
operating the control keys, press one of the DInput 
selector keys to select an external component to be 
controlled.

B TV p
Turns on the power of your TV or set it to the standby 
mode.

B AV p
Turns on the power of the selected component or set it to 
the standby mode.

G Cursor (

Use to select menu items.

H TOP MENU
Displays the top menu of a Blu-ray disc or DVD.

H MENU
Displays the menu of a Blu-ray disc or DVD.

I RETURN
Returns to the previous menu screen.

J CH 

Switches between available channels for your external 
component.

L TV operation keys

TV VOL +/–
Adjusts the audio output level of your TV.
TV MUTE
Temporarily mutes audio output from your TV.
TV INPUT
Switched the input source for your TV.

N Numeric keys
Use to enter numeric digits or specify a channel number.

O CODE SET
Sets remote control codes for external component 
operations (page 42).

P External component operation keys
Use to control playback of your external component.

y

• The BTVp and LTV operation keys always work regardless 

of the selected input source.

• Depending on external components, some or all operations may 

not work. In this case, operate the component using the supplied 
remote control.

• If you operate your TV with the remote control of this unit 

when the HDMI control function is activated, this unit or 
external component connected to this unit with HDMI works 
improperly in some cases.

■ Setting remote control codes

While holding down OCODE SET, press 
DInput selector key to which the remote 
control code is assigned.
ATransmission indicator flashes twice.

Release OCODE SET.

Press NNumeric keys to enter the remote 
control code (page 49) for your external 
component.
Each time you press you press the key, 
ATransmission indicator flashes once. Once the 5-
digit remote control code is entered properly, 
ATransmission indicator lights up for approximately 
2 seconds.

y

• To clear remote control code set to a selected input source, 

enter “00010”.

• If any key other than NNumeric keys is pressed, 

ATransmission indicator flashes 5 times and the setting 
mode is canceled.

Perform a test operation using the remote 
control of this unit.
If the external component functions correctly, the 
remote control code setup is successful. If it does not 
function correctly, the remote control code may be 
incorrect. Check the remote control code for your 
external component (page 49) and try again.

• If no operation is performed after step 1 or in the middle of 

step 2 within 30 seconds, ATransmission indicator 
flashes 5 times and the setting mode is canceled.

■ Resetting all remote control codes

While holding down OCODE SET, press 
ISETUP.
ATransmission indicator flashes twice.

Release OCODE SET.

Press NNumeric keys to enter “99999”.
Each time you press the NNumeric keys, 
ATransmission indicator flashes once. Once the 
remote control code is entered properly, 
ATransmission indicator lights up for approximately 
2 seconds and then the initialization is completed.

• If one of the other keys is pressed, ATransmission 

indicator flashes 5 times and the initialization is canceled.

A

B

N

O

P

I

G

C

D

K

H

J

L

ATransmission 

indicator

BAV

BTV

CPower

DInput selector keys

GCursor (

 / 

 /   / 

) keys

GENTER

HMENU

HTOP MENU

IRETURN

JCH  

/ 

KMUTE

KVOLUME +/–

LTV operation keys

NNumeric keys

OCODE SET

PExternal component 

operation keys