Siemens TC63 Manual Do Utilizador
TC63 AT Command Set
3.4 AT+CEER
s
TC63_ATC_V00.490
Page 78 of 501
5/24/05
Confidential / Draft - Do not copy
3.4
AT+CEER Extended Error Report
• call release
• failure to set up a call (both mobile originated or terminated)
• failure to modify a call by using Supplementary Services
• failed attempt to activate, register, query, deactivate or deregister a Supplementary Service
• unsuccessful GPRS attach or unsuccessful PDP context activation
• GPRS detach or PDP context deactivation
The release cause report is presented in numeric format. Default output in case of a none-error-situation is
• failure to set up a call (both mobile originated or terminated)
• failure to modify a call by using Supplementary Services
• failed attempt to activate, register, query, deactivate or deregister a Supplementary Service
• unsuccessful GPRS attach or unsuccessful PDP context activation
• GPRS detach or PDP context deactivation
The release cause report is presented in numeric format. Default output in case of a none-error-situation is
+CEER: 0,0,0. A description associated with each number can be found in the tables given in the following sub-
clauses and the relevant GSM specifications.
serves to locate the other two parameters. Depending on the failure or
are applicable, i.e. if
≠ 0, then
Vice versa, if
may be
≠ 0.
=1 instead.
Syntax
Parameter Description
Location ID as number code. Location IDs are listed in Section
. Each ID is related with another table that contains a list of
Reason for last call release as number code. The number codes are listed in several tables, sorted by different
categories in the following subclauses. The tables can be found proceeding from the Location ID given in Sec-
Release cause for last Supplementary Service call (listed in Section
) or last call related use of a Supplementary Service (listed in Section SIEMENS release cause
for Call-related Supplementary Services (CRSS)).
Test Command
AT+CEER=?
Response(s)
OK
ERROR
+CME ERROR
Exec Command
AT+CEER
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07
%
%
%
%
%
%
%
!
%
!
<locationID>
(num)
<reason>
(num)
<ssRelease>
(num)