Sanyo POA-MD13NET2 Manual Do Utilizador

Control the projector with Telnet

This product allows you to control the projector by using the Telnet application.
Normally, it is used for controlling the external equipment connected to the serial port
and also control the projector itself by specifying the telnet port no.10000.
* It is not affected by the serial port setting of the projector when using the telnet appli-

cation.

In the step 2 of the previous page, enter port no. “10000” after the IP address no.

> open 192.168.1.201 10000 return

* Use the IP address

assigned to the pro-
jector

After the communication is established, type the password and the command for
controlling the projector and then enter “Enter” key.
The right table shows the typical command lists for controlling the our projector and
please consult your local dealer for further information of another commands.

C00

Turn the projector on

C01

Turn the projector off

C05

Selects input1

C06

Selects input2

C07

Selects input3

C08

Selects input4

C09

Volume up

C0A

Volume down

C0B

Mute on

C0C

Mute off

C0D

Video mute on

C0E

Video mute off

C1C

Menu display on

C1D

menu display off