EnGenius Technologies durafon 1x Manual Do Utilizador

~19~

1. DC 

In 

 

Connects to Charger AC Adaptor. 

 

 

 

2.  Handset Charging Slot 
 

a.  Charge handset battery when handset is placed in cradle.  

 

b.  Refer to the handset LCD for charging status 

  (1) 

Charging: 

LCD 

screen showed “Charging” 

 

 

(2)  Fully Charged: battery status bar stands still and the LCD screen would 

display “Fully Charged” 

 

 

(3)  Charge Fail: Should there be any error occurred during charging mode, 

the LCD screen would display “Charge Fail” 

 

 

 

3.  Spare Battery Charging Slot 
 

a.  Charge spare battery when battery is placed in slot.   

 

b.  LED as the spare battery charging indicator 

 

 

(1)  Slot is empty and the power is on: LED is Green light 

 

 

(2)  Charging: LED is Orange light 

 

 

(3)  Fully Charged: LED returns to Green light 

 

 

 

4.  It is impossible to overcharge the battery using this charger. 

Notes:  
1.  Fully charge battery packs before first use.
2.  Both handset and spare batteries can be charged at the same 

time.

3.  Handset will be “power on” automatically when placing on the 

charging slot.  

4.  However, if you run drain the battery, it would take around one 

minute for handset to auto power on. 

 

 

 

5.  The adaptor for charging station can be used as travel charger as well. 

However, you can’t turn off the power while you charge the handset via 
travel charger. A Warning message: “Unplug Travel Charger than OFF 
the power” will be shown on the LCD display.  

~20~

Getting Started 

There are three possible base station setups: 
z

Base station alone 

z

Base station plus telephone answering device 

z

Base station plus standard telephone 

For best performance, maintain at least a distance of 1 meter (about 3 feet) 
between the base station and other electronic devices (e.g., TV, computer, 
stereo, fax machine, answer machine, cordless phone, etc.) 

1.  Install base station antenna. 
 

The base station’s antenna port has a 
reverse-thread connector; to install 
antenna or cable, turn counter-clockwise.

 

 

 

2.  Plug the transformer end of the base 

station AC/DC adaptor into a standard AC 
electrical power outlet, plug the other end 
into the “DC In” jack on the back of the 
base station. 

 

 

 

3.  Plug phone cord into the “LINE” Jack 
 

 

 

4.  A standard telephone or answering 

machine can be plugged into the adjacent 
receptacle on the bottom of the base 
station marked TEL 

 

 

 

1.  Plug the transformer end of the Charger AC/DC adaptor into a standard 

AC electric power outlet, plug the other end into the “DC In” jack on the 
back of the Charging Cradle. 

2.  Install battery pack onto the handset. 
3. Install 

handset 

antenna. 

4.  Place handset onto the charger front slot. 
5.  Fully charge the battery for three hours before use. 
6.  The phone system is now ready to perform basic functions such as making