EnGenius Technologies durafon 1x Manual Do Utilizador

~31~

1.  If your handset(s) is purchased as part of a system, it has been pre-

registered with the base station at the factory. 

 

 

 

2.  If Handset ID as “00,” that means it is a new handset or the ID has been 

erased. You need to register the handset with the base station. 

3. Registration: 
 

a.  Press MENU-6 to enter the registration mode 

 

b.  Press and hold the base’s Registration (REG) 

button for 2 seconds until 4 LEDs light up. 

 

c.  Press handset key “1”, this completes the 

registration process.  When you register the 
handset to BASE 10, the base will assign a 
handset ID between 12 and 19.  The assigned ID 
will be displayed on the handset LCD, indicating 
successful registration. 

 

d.  Repeat above steps for all additional handsets. 

 

e.  The first two handsets registered will be given ID 

11 and 12, which gives them administrator 
privileges.

4. De-registration: 
 

a.  You can de-register a handset from a base.  De-registration will 

reset the Handset ID to 00, erase the system security code, and free 
up the old ID for future registration. 

 

b.  After deregistration, the handset will not be able to use the base to 

make or receive phone calls, nor can it intercom other handsets. 

 

c.  Press handset Menu (Right) soft key. 

 

d.  Press the handset number key “6”, this will enter the handset 

registration menu. 

 

e.  Press and hold the base’s REG button for 2 seconds until 4 LEDs 

come on. 

 

f. 

Press the handset number key “2”, this completes the de-
registration process.  Upon successful de-registration, the handset 
will show ID “00”. 

1.  The base has a 30 second registration timeout starting from 

­ 11             

Main Menu:      

ÇÈ

5. Settings 
6. Registration

­ 11             

Registration: 

ÇÈ

1. Register 
2. Deregister

~32~

pressing the REG button.  The handset has a 12 second 
registration timeout starting from the registration or de-
registration option has been selected.  The base and handset 
will automatically exit registration mode after timeout. 

2.  When you conduct the registration procedure with BASE 20, the 

handset ID will be ranging from 21 to 29.  

3.  Up to 4 bases can be installed to form a sub-multiple line 

system.  

4.  Repeat registration or de-registration process if unsuccessful. 

1.   Up to nine handset groups (01-09) can be defined and handsets can 

decide which group(s) they want to be in. 

 

 

 

2.  For example, Group 1 represents the Customer Service Group, Group 2 

represents the Sales Group, and Group 3 is the Marketing Group.  
Suppose that Handset 11 wants to receive incoming rings for all Sales 
and Marketing related calls.  Then handset 10 will need to “subscribe” to 
Group 2 and Group 3. 

3. Group 

Selections: 

 

a.  Press handset Menu-5 to enter the handset 

setting menu 

 

b.  Press number “2”, handset enters group select 

menu.

 c. 

Press 

ADD

 soft key and enter two-digit group 

number (01-09) to add membership in a group. 

 

d.  Repeat for all desired groups. 

 e. 

Delete group selections by pressing 

DELETE

(Right) soft key and enter group number. 

Notes:
1.  The handset can change group affiliations at any time. 
2.  The base (administrator) is not responsible for group 

assignments.  Consequently, it cannot de-subscribe a handset 
from a group. 

Registration of Additional Base  
1.  DuraFon 1X can be installed as the multiple base configurations: up to 4 

base units can be registered. The BASE 10 serve as the master base.  

 

 

 

2.  Use admin handset, HS 11 or HS12, to conduct the registration for 2

nd

,

­ 11             

Settings:      

ÇÈ

1. Dial Prefix 
2. Group Selection 

­ 11             

Groups 

ADD

  DELETE