Server Technology PP02 Manual Do Utilizador

 

 

1  2  3  4  5  6  7  8

ON

 

RE

BOOT Mode, Power is normally ON 

No Answer 

RE

BOOT Method; minimum rings required to effect a reboot = 1 

2-hour Off-Hook (busy) 

RE

BOOT - Enabled 

1 Calls placed to the phone number of the line attached to the Power On/Off +Aux are answered on the first ring by the 

Host system or device and logon is successful.  A 

RE

BOOT will not occur unless the caller remains on-line for over 

two hours. 

2  A user places a call to retrieve new messages from a designated dial-up E-mail server, but the call is never answered; 

an error condition has occurred and the E-mail system is no longer responding.  The line continues to ring until the 
user's modem times out.  Once the incoming RINGs cease, the E-mail server is powered-OFF, a 30 second settle time 
passes, then the server is powered-ON -- A full coldboot!  The same user tries again a couple of minutes later, the 
call is answered, and new mail is retrieved. 

3  A user places a call to his favorite BBS, but always receives a telephone company BUSY signal  -- an error condition 

has occurred and the BBS modem is stuck off-hook, causing the line to remain busy.  Unaware to the caller, the line 
has been busied-out for 1 hour 45 minutes and will 

RE

BOOT automatically in another 15 minutes (2 hour Off-Hook 

RE

BOOT).  The same caller tries again, one half hour later, and logon is successful. 

 

•  34