Server Technology PP02 Manual Do Utilizador

The front panel of the Power On/Off +Aux control unit contains two indicator lights.  These LEDs inform the user of the 
current power status, present phone-line condition, and indicate whether or not the power has been activated remotely 
since it was last turned off manually.   The activity of both lights varies according to the Operating Mode you have 
chosen. 

 

 

Power-ON and Infinite-On/Off Modes

In the Power-ON Mode and Infinite-On/Off Mode the ON/OFF light indicates the current status of the power signal sent 
to the IPM.  There are four possible states for this light: 

•

 

OFF ~ The IPM should not be providing any power.  The LED is solid OFF. 

•

 

FLASHING FAST ~ The power was activated remotely via RING and is ON.  In this state the LED will illuminate 
2x per second. 

 

 

1/4 second ON - 1/4 second OFF 

•

 

ON ~ The power was activated manually by the master switch and is ON.  The lamp is solid ON. 

•

 

FLASHING SLOW ~ Indicates that the power was activated manually by the master switch, is ON, and the 15 Ring 
Turn-Off option is enabled or the Infinite-On/Off Mode is being used In this state, the lamp will flash in a 4 second 
cycle. 

 

 

3 seconds ON - 1 second OFF 

 

 

 

 

 

RE

BOOT Mode

In the

 RE

BOOT Mode the ON/OFF lamp will have only three possible states:  

•

 

FLASHING ~ The power is ON and the 

RE

BOOT function is enabled.  In this state the LED will illuminate 2x per 

second. 

 

 

1/4 second ON - 1/4 second OFF 

•  36