Alto-Shaam 500-th-iii Manual Do Utilizador

pg

. 20 

TH/III 

InsTallaTIon

/

operaTIon

/

servIce

 

manual

Select the product to be programmed and begin programming with the oven control power O

ff

.

 key.  The oven will beep for one second and power to the unit 

will be indicated by an illuminated green indicator light located in the upper left corner of the 

O

N

/O

ff

 key.  The oven will begin operating in the hold mode.  The amber H

old

 indicator will be 

illuminated and the last set hold temperature will be displayed.

To set Cook temperature — Press c

ook

 Key.  Oven preheat indicator will illuminate and the last 

set cooking temperature is displayed.  To change the cook temperature, press the u

p

 or d

own

 

a

rrow

 Keys. 

if cooking by time — press the t

ime

 Key.  The green t

ime

 indicator will illuminate and the last set 

cooking time will be displayed.  To change the set time, press the u

p

 or d

own

 a

rrow

 Key.  The 

display will alternate between the set temperature and the elapsed time.

if cooking by probe — press the 

p

robe

 Key.  The green p

robe

 indicator will illuminate and the last 

set internal product temperature will be displayed.  To change the set temperature, press the u

p

 

or d

own

 a

rrow

 Key.  The display will alternate between the set temperature, the elapsed time, 

and the probe temperature.

To set Hold temperature — Press the h

old

 Key. The green cook indicator light will remain 

illuminated.  To change the hold temperature, press the u

p

 or d

own

 a

rrow

 Key.  The display 

will alternate between the set hold temperature and the amount of time the product has been in 

the hold mode.  Oven will remain in the h

old

 mode until the o

N

/o

ff

 key is pressed.

Select a letter code for the product programmed by the previous steps.  Press and hold the selected 

p

reset

 key for two seconds.  When the preset has been saved, you will hear a one second beep and the 

preset light will illuminate. 

note:  Only one preset can be programmed at a time. If programming an additional preset is 

desired, the unit must be started and stopped either by cycling the power to the cavity or by 

pressing the S

tart

/S

top

 key. The last p

reset

 Key used will be the oven cooking run sequence 

for the next product to be programmed.  Settings can be manually changed for the next 

product and an alternate pre-programmed letter key selected.

To erase a program, the oven must be in either the power-up hold mode or in the preheat mode.  The oven 

cannot be running a p

reset

 Menu program.

When the oven is in the power-up hold mode or in the preheat mode, press and hold the c

ancel

 Key and 

then the appropriate letter p

reset

 Key to be erased for two seconds.  When the preset has been erased the 

oven will beep for one second.