Lowrance electronic globalmap baja 840c Manual Do Utilizador

122 

7. Use 

↓ ↑, ← → to input the capacity (gallons) of the tank you chose 

from the Tank Select menu and press 

. 

8. Repeat Steps 5-7 for each remaining tank.  
9. When all tanks have been configured, press the 

 but-

ton. The following confirmation message will appear: Are you sure you 
wish to change the bus configuration? Choose 

 and press 

, Press 

 to get back to the main display. 

Device Configuration Menu 
When a device is selected from the network devices list on the Bus Con-

figuration menu, its Device Configuration menu will appear. Device 

configuration menus vary among devices. Available functions on device 

configuration menus allow you to change device names, tank sizes, 

fluid types and provide access to the Advanced Options menu. We will 

cover configuration and calibration later in this section. 
Device Information and Device Data 
The Device information panel, located to the left of the Device Configura-

tion menu, displays information on the selected device that includes, soft-

ware version, model, address, serial number, instance and current status.  

 

Device Data is shown in the Device Data window at the bottom of the de-

vice configuration menu. The information displayed in the Device Data 

window will vary among devices. If, for example, you are viewing the de-

vice configuration menu for an EP-15 Fluid Level, the device data window 

will include tank size and the amount of fuel left in the tank. The Device 

Data for an EP-10 Fuel Flow includes Fuel Rate (amount of fuel burned 

per hour), Fuel Used, Trip Fuel Used and Seasonal Fuel Used.