Lowrance electronic globalmap baja 840c Manual Do Utilizador

123 

If, as in the graphic above, you do not have a Suzuki Engine Inter-

face, EP-15 Fluid Level or EP-10 Fuel Flow on the network, the 

Engine & Configuration menu, Tank Select menu, Tank Size dialog 

and Set Configuration button will not be displayed on the Bus Con-

figuration menu. 

The Fuel Management menu gives you access to the following options: 

Tank Location, Fuel Added, Add Fuel, Fill Tank, Engine Select, Reset 

Calibration, Reset Trip and Reset Seasonal. Those options allow you to 

configure, calibrate, reset calibration, reset trip fuel and reset seasonal 

fuel for select NMEA 2000 devices. We will cover configuration and cali-

bration procedures later in this section. 

   

 

If you chose an engine-tank configuration with more than one tank, you 

will be able to switch the tank location (configuration) in the Tank Lo-

cation menu. When fuel is added to a tank, you will select the correct 

tank from the Tank Location menu, then input the amount of fuel 

added in the Fuel Added dialog box. 

Used in tandem with the Add Fuel command, the Fuel Added dialog 

box allows you to input the amount of fuel added to the tank, when an 

amount of fuel is added that does not fill up the tank.  

After entering the amount of fuel added to a tank in the Fuel Added 

dialog, the Add Fuel command finalizes the entry of the data. Like the 

Fuel Added dialog, the Add Fuel command will only be used when an 

amount of fuel is added that does not fill up the tank.