Lowrance electronic globalmap baja 840c Manual Do Utilizador
125
3. Highlight to
E
NGINE
S
ELECT
and press
ENT
. Select the desired engine —
the engine attached to the desired fuel flow — and press
ENT
.
4. Highlight
R
ESET
C
ALIBRATION
and press
ENT
. The following confirma-
tion message will appear: Are you sure you wish to Reset Calibration?
Select
Y
ES
and press
ENT
. Calibration settings for the selected fuel have
been returned to factory defaults.
To Reset Trip:
The Reset Trip function allows you to reset to zero the running total of
fuel used on a particular trip.
1. Press
1. Press
MENU
|
MENU
, select
NMEA
2000
and press
ENT
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENT
. The Fuel Management
menu will appear.
3. Select
3. Select
R
ESET
T
RIP
and press
ENT
. The following confirmation message
will appear: Are you sure you wish to Reset Trip? Highlight
Y
ES
and
press
ENT
. The Trip Fuel Used figure has been reset to zero.
To Reset Seasonal:
Your unit can track fuel usage not only for trips, but also for entire sea-
sons. The reset seasonal command allows you to reset to zero the run-
ning total of fuel used during a season.
1. Press
1. Press
MENU
|
MENU
, select
NMEA
2000
and press
ENT
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENT
. The Fuel Management menu
will appear.
3. Select
3. Select
R
ESET
S
EASONAL
and press
ENT
. The following confirmation mes-
sage will appear: Are you sure you wish to Reset Seasonal?
Highlight
Highlight
Y
ES
and press
ENT
. The Seasonal Fuel Used figure is reset to zero.
NMEA 2000 Alarms
The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for the EP-10 Fuel Flow, EP-15 Fluid Level, EP-50 Storage De-
vice and the Suzuki Engine Interface. The alarms may be set to a per-
centage (0-100%) of tank capacity.
The second tab at the top of the NMEA 2000 Alarms page is the Alarm
The second tab at the top of the NMEA 2000 Alarms page is the Alarm
Status Tab. When an alarm has been set for a device, the alarm and its
current status will be shown on the Alarm Status window. To view the
Alarm Status window, highlight the Alarm Status tab and press
ENT
.
To set NMEA 2000 Alarm:
1. Press
MENU
|
MENU
, select
NMEA
2000
and press
ENT
.
2. Highlight
NMEA
2000
A
LARMS
and press
ENT
.
3. Highlight
F
LUID
L
EVEL
D
EVICE
and press
ENT
. Use
↑ ↓ to select the device
you want to set an alarm for and press
ENT
.