Philips WAC3500D Manual Do Utilizador
Select the Wi-Fi network (router) to which your desired UPnP device is connected.
Press
2
to continue.
In screen Set IP Mode, select Automatic.
As prompted, select Yes to apply the settings.
>
Center is connected to the Wi-Fi home network.
Any Stations might be disconnected from the Wi-Fi network of Center.
Any Stations might be disconnected from the Wi-Fi network of Center.
Tip
If you change the WEP / WPA / WPA2 key after you have added the WAC3500D into your
home network, the connection between the WAC3500D and your home network will be lost.
In this case, please restart WAC3500D Center in order to refresh the IP update.
If you change the WEP / WPA / WPA2 key after you have added the WAC3500D into your
home network, the connection between the WAC3500D and your home network will be lost.
In this case, please restart WAC3500D Center in order to refresh the IP update.
Applicable if you already have a wireless network (hub/switch/router).
11.3
Connect to wired home network
The wired home network can be a single PC, a PC network, another Center or a Station.
Center can access the wired and wireless home network at the same time. Using the supplied
Ethernet cable, you can connect Center separately to a wired network while maintaining its Wi-Fi
connection (e.g. the Wi-Fi connection between Center and on or more Stations, or the Wi-Fi
connection with a home network). In this way, you can opt to play the music library of the wired
network only on Center or a single Station (UPnP playback).
Ethernet cable, you can connect Center separately to a wired network while maintaining its Wi-Fi
connection (e.g. the Wi-Fi connection between Center and on or more Stations, or the Wi-Fi
connection with a home network). In this way, you can opt to play the music library of the wired
network only on Center or a single Station (UPnP playback).
At the same time, you can still enjoy all the music playback features on the Wi-Fi network.
11.3.1 Set network on Center
Check that network device is switched on and firewall (if applicable) is switched off.
Connect supplied Ethernet cable to Ethernet ports on network device and Center.
Press
MENU
to enter the menu screen
3
2
1
7
6
If you already know the WEP / WPA
/ WPA2 key for the Wi-Fi network:
/ WPA2 key for the Wi-Fi network:
Use the remote control to enter
the WEP,WPA, or WPA2 key.
the WEP,WPA, or WPA2 key.
Press
OK
to
confirm.
If there is no WEP / WPA / WPA2
key for the Wi-Fi network:
key for the Wi-Fi network:
Press
OK
to skip.
5
4
3
Network settings
66