Philips WAC3500D Manual Do Utilizador
Use
3
or
4
and
2
to enter Settings followed by Network, then Wired.
Press
2
to continue.
In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic.
*
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
addresses to devices on a network.
If there is no DHCP, select Static and assign an IP address and subnet mask as prompted using the
alphanumeric keys (see 4.4 Alphanumeric keys).This procedure is applicable only, if you already
have a wired network (hub / switch / router) in your home.
alphanumeric keys (see 4.4 Alphanumeric keys).This procedure is applicable only, if you already
have a wired network (hub / switch / router) in your home.
On Center
As prompted, select YES to apply settings.
>
Center is connected to the external wired network.
On the display the icon
On the display the icon
is changed to
.
Wireless / Wired
Router
www
1
6
5
Network settings
67
ENGLISH