Pelco DX4500 Manual Do Utilizador
C2676M (9/07)
13
REMOVING THE HDD
NOTE: It is recommended that you do not remove previously installed drives. If you do remove a drive for
any reason, be sure to note the arrangement of the drives within the drive basket and reinstall them in the
same order they appeared prior to removal. It is critical that drives be returned to the DX4500/DX4600 in
their original order.
any reason, be sure to note the arrangement of the drives within the drive basket and reinstall them in the
same order they appeared prior to removal. It is critical that drives be returned to the DX4500/DX4600 in
their original order.
1. To remove the HDD (if applicable) from the basket do the following:
a.
Using a Phillips screwdriver, unscrew the screws that attach the drive to the basket.
b.
Pull the drive out of the basket.
Figure 10. Removing the HDD from Mounting Basket
INSERTING THE HDD
1. To insert the HDD in the basket, do the following:
a.
Position the drive in the basket.
b.
Using a Phillips screwdriver, reinstall the screws to attach the drive to the basket.
c.
(If necessary) Repeat steps a and b to insert another HDD.
Figure 11. Reattaching HDD to Mounting Basket