Interphase Tech ispan 5535 pri Manual Do Utilizador
Chapter 5: Setting Up WAN Firmware and Hardware
iSPAN PRI PCI ISDN Users Guide
55
Use the following buttons to set up microcode information:
N
OTE
The Properties button in the Microcode section is
disabled because this product has no configurable layers.
disabled because this product has no configurable layers.
Hardware Management
The Cards section of the WAN Adapter Setup dialog displays
all the Interphase adapters installed in the machine, their
status, and their available communication ports. The
all the Interphase adapters installed in the machine, their
status, and their available communication ports. The
Click...
To do this...
Load
Download the current microcode to the selected adapter.
C
AUTION
CAUTION: This option disconnects all
current RAS-connected users and
disables the RAS Server. After a
microcode download, the RAS Server
must be re-enabled, as follows:
current RAS-connected users and
disables the RAS Server. After a
microcode download, the RAS Server
must be re-enabled, as follows:
1. From the Start menu, select Programs, then
Administrative Tools (Common), and then Remote
Access Admin.
Access Admin.
2. From the Server menu, select Stop Remote Access
Service, and then Start Remote Access Service.
New
Set an alternate microcode as the current one.