Interphase Tech ispan 5535 pri Manual Do Utilizador
Setting Up ISDN PRI Port Properties
56
Interphase Corporation
Microcode section displays firmware information for the
adapter selected in the Cards section. You can use the buttons
in this section to add, remove, or configure WAN adapters.
adapter selected in the Cards section. You can use the buttons
in this section to add, remove, or configure WAN adapters.
The adapter status is represented by its icon color:
Use the following buttons to set up adapter hardware:
Setting Up ISDN PRI Port Properties
N
OTE
Before you configure your PRI ISDN line, first obtain the
ISDN switch type from your ISDN provider.
ISDN switch type from your ISDN provider.
LED Color
Meaning
Gray
The adapter is detected but is not working.
Yellow
The hardware configuration has been changed but not
applied.
applied.
Green
The adapter is running.
Click...
To do this...
Add
Add a new adapter. This option is enabled if one more
Interphase adapters can be installed.
Interphase adapters can be installed.
Remove
Remove an existing adapter. This option removes an adapter
and its drivers.
and its drivers.
Properties
Display the hardware properties of a selected adapter or the
port properties of a selected port. For ISDN ports, these
properties are essentially subscription parameters, such as
switch type.
port properties of a selected port. For ISDN ports, these
properties are essentially subscription parameters, such as
switch type.